NI PXIe-6361高性能數據采集卡產品特點
1.產 品 資 料 介 紹：
中文資料：
NI PXIe-6361是一款高性能數據采集卡，具有廣泛的應用范圍。下面是對該產品的特點、使用方法以及參數的詳細介紹：
產品特點：
- 高性能數據采集：NI PXIe-6361采用了高速模數轉換器（ADC），可實現高精度、高速率的模擬信號采集。
- 多通道采集：該采集卡具有16個模擬輸入通道，可以同時采集多個信號通道的數據。
- 高采樣率：支持高達2 MS/s的采樣率，可滿足對高速動態信號的采集需求。
- 低噪聲和高分辨率：具備優秀的信噪比和分辨率，可實現對微弱信號的準確采集和測量。
- 多種測量功能：支持模擬輸入、數字輸入/輸出、計時器/計數器和觸發等功能，滿足各種測試和測量應用的需求。
使用方法：
- 硬件連接：將NI PXIe-6361插入PXI Express插槽，并連接相應的信號源或傳感器到模擬輸入端口。
- 驅動程序安裝：安裝NI-DAQmx驅動程序，該驅動程序提供了使用和配置采集卡的接口。
- 軟件編程：使用支持NI-DAQmx的編程環境（如LabVIEW、C/C++、Python等），編寫程序以配置和控制采集卡，以及進行數據采集和分析。
參數詳情：
- 模擬輸入通道數：16
- 模擬輸入分辨率：16位
- 采樣率范圍：100 kS/s - 2 MS/s
- 輸入電壓范圍：±10 V
- 數字輸入/輸出通道數：8
- 計時器/計數器通道數：2
- 供電方式：PXI Express總線供電或外部電源供電
- 接口類型：PCI Express x1或更高版本
- 支持的操作系統：Windows、Linux
英文資料：
NI PXIe-6361 is a high-performance data acquisition card with a wide range of applications. The following is a detailed introduction to the characteristics, usage methods, and parameters of the product:
Product features:
High performance data acquisition: NI PXIE-6361 adopts a high-speed analog-to-digital converter (ADC), which can achieve high-precision and high-speed analog signal acquisition.
Multi channel acquisition: This acquisition card has 16 analog input channels and can simultaneously collect data from multiple signal channels.
High sampling rate: Supports a sampling rate of up to 2 MS/s, which can meet the collection needs of high-speed dynamic signals.
Low noise and high resolution: With excellent signal-to-noise ratio and resolution, it can achieve accurate collection and measurement of weak signals.
Multiple measurement functions: support analog input, digital input/output, timer/counter, and trigger functions to meet the needs of various testing and measurement applications.
usage method:
Hardware connection: Insert NI PXIe-6361 into the PXI Express slot and connect the corresponding signal source or sensor to the analog input port.
Driver installation: Install the NI-DAQmx driver, which provides an interface for using and configuring the acquisition card.
Software programming: Using a programming environment that supports NI-DAQmx (such as LabVIEW, C/C++, Python, etc.), write programs to configure and control the acquisition card, as well as perform data collection and analysis.
Parameter details:
Number of analog input channels: 16
Analog input resolution: 16 bits
Sampling rate range: 100 kS/s -2 MS/s
Input voltage range: ± 10 V
Number of digital input/output channels: 8
Timer/Counter Channel Count: 2
Power supply method: PXI Express bus power supply or external power supply
Interface type: PCI Express x1 or higher
Supported operating systems: Windows, Linux
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.goldvipcard.com
